![]() |
|
![]() |
This wastewater treatment technology has been utilized
by Red Fox for over (30) years. This design is utilized on offshore fixed
platforms and as well as land-based/suburban applications.
|
|
|
The process used by the conventional/land based units involves only three steps:
|
|
Conventional/Land Based Unit offers these benefits:
|
|
System Principles & Unit Diagram The first operation is a coarse screening process. As the influent enters the sewage treatment unit, it passes through a bar strainer. This strainer will catch any large trash such as rags, plastic bags, etc., and prevent it from entering the system. The second operation is aeration. As the sewage passes through the bar screen, it flows into the aeration chamber where the incoming raw sewage is mixed with the fluid in the chamber that contains a large concentration of very active aerobic bacteria that consume the organic waste material in the sewage. Air, which is used to keep the solids suspended and support the aerobic bacteria, is provided to the chamber by utility air or an optional air blower system. The third operation consists of clarification and settling. The displaced liquid then travels into the clarification chamber where the fluid is kept as still as possible allowing the sludge to flocculate and settle to the bottom. This settling process separates the sludge from the clear liquid allowing only clear water free of waste to escape out of the chamber. The fourth operation is the disinfection process. This chamber allows the fluid to pass through a chlorine mixture or an ultraviolet system in areas where chlorine disinfection is not allowed. It then retains the fluid in this chamber until all the bacteria that were allowed to pass through the previous chambers are killed off. |
|
![]() |
|
|
|
|
|
|
|
CONTACT REDFOX I REDfOX
LINKS I REDFOX SITE MAP |
|